Steps:
1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!
-So-
127.0.0.1 localhost
127.0.0.2 www.blockedsite.com
Tuesday, April 13, 2010
Use Your Pen Drive as Ram
Yes with some modified settings you can use your pen drive as a RAM
1) Connect your pen drive to your PC [pen drive should be at least 1 GB or if you having 4 GB then its better]
2) Allow PC what he is supposed to do,let system to detect pen drive.
3) After your PC finished with its detection work,you have to do some little
4) Right click on the My Computer and select the properties
5) Goto advanced and then performance setting then advanced then
6) Select pen drive and click on custom size " Check the value of space available "
7) Enter the same in the Initial and the Max columns
" You just used the memory of the PenDrive as a Virtual Memory "
Now restart your pc and enjoy your fast and super system
1) Connect your pen drive to your PC [pen drive should be at least 1 GB or if you having 4 GB then its better]
2) Allow PC what he is supposed to do,let system to detect pen drive.
3) After your PC finished with its detection work,you have to do some little
4) Right click on the My Computer and select the properties
5) Goto advanced and then performance setting then advanced then
6) Select pen drive and click on custom size " Check the value of space available "
7) Enter the same in the Initial and the Max columns
" You just used the memory of the PenDrive as a Virtual Memory "
Now restart your pc and enjoy your fast and super system
Increase Hard Disk Speed in Windows
If you like to increase/optimize your Hard Disk I/O – read/write speed without buying expensive software utilities to do that job, just follow next steps. With doing these steps you will increase Hard disk speed (depends of manufacture and specification, but its worth to try). The most speed improvement is visible with IDE drives; however there are reports that this tweak also does good for SCSI disks.
In any case, it won't harm your system, so try it yourself and let me know what you find!
Steps:
1. Run SYSEDIT.EXE from the start.
2. Expand the system.ini file window.
3. find a line called [386enh].
4. Press Enter to make one blank line, and in that line type
5. Irq14=4096 (note: This line IS CASE SENSITIVE)
6. Click on the File menu, then choose Save.
7. Close SYSEDIT and reboot your computer.
8. Restart windows!
The speed improvement will be noticed just after the system reboots, any system info. software can be used to check the improvement.
In any case, it won't harm your system, so try it yourself and let me know what you find!
Steps:
1. Run SYSEDIT.EXE from the start.
2. Expand the system.ini file window.
3. find a line called [386enh].
4. Press Enter to make one blank line, and in that line type
5. Irq14=4096 (note: This line IS CASE SENSITIVE)
6. Click on the File menu, then choose Save.
7. Close SYSEDIT and reboot your computer.
8. Restart windows!
The speed improvement will be noticed just after the system reboots, any system info. software can be used to check the improvement.
Subscribe to:
Posts (Atom)